專業11UP55-VR - Laser Power Detector廠商

產品分類

11UP55-VR - Laser Power Detector

Standa

11UP55

產品特色

11UP55-VR - Laser Power Detector  雷射功率偵測器

  

 主要特色

  •  模組化設計
      可透過 4 種不同冷卻模組,提升偵測器的功率處理能力。

  •  高峰值功率體積式吸收層
      專為高功率密度光束設計,平均功率密度達 700 W/cm²,可防止因重複脈衝造成的吸收層劣化。

  •  大面積入射孔徑
      52 mm 直徑的有效孔徑,可容納大型雷射光束。

  •  高平均功率處理能力
      使用水冷模組時,可量測最高達 300 W 的連續雷射功率。

  •  智慧型介面
      內含完整校正數據,確保精準量測。

 

相容監測儀:

 


11MAESTRO

11UNO

11TUNER

11M-LINK

11P-Link

11S-LINK

 

 

 

 Main Features

  •  Modular Concept
      Increase the power capability of your detector with 4 different cooling modules

  •  High Peak Power Volume Absorber
      
Perfect for high density beams
      Average power density of 700 W/cm2 prevents degradation caused by repetitive pulses

  •  Large Aperture
      52 mm Ø aperture accomodates the largest beams

  •  High Average Power
      Up to 300 W of continuous power with the water-cooled unit

  •  Energy Mode
      Measure single shot energy up to 1000 J

  •  Smart Interface
      Containing all the calibration data

 

 

Compatible Monitors:


11MAESTRO

11UNO

11TUNER

11M-LINK

11P-Link

11S-LINK

 

 

Model 11UP52N-50S-QED 11UP52N-100H-QED 11UP52N-150F-QED 11UP52M-300W-QED
Maximum average power (continuous / 1 minute) 50 W / 50 W 100 W / 100 W 150 W / 150 W 300 W a) / 300 W a)
Noise Equivalent Power b) 15 mW
Spectral Range c) 0.266 – 2.5 µm
Typical rise time d) 4 sec
Power calibration uncertainty e) ±2.5 %
Repeatability ±0.5 %
MEASUREMENT CAPABILITIES (ENERGY MODE)
Maximum measurable energy f) 1000 J
Noise equivalent energy g) 0.25 J
Minimum repetition period 9 s
Maximum pulse width 371 ms
Energy calibration uncertainty h) ±5 %
DAMAGE THRESHOLDS
Maximum average power density i) 100 kW/cm2
Maximum energy densityj) 8 J/cm2
PHYSICAL CHARACTERISTICS
Cooling Convection Convection (heatsink) Fan Water
Aperture diameter 52 mm
Absorber QED
Weight 89H x 89W x 32D mm 89H x 89W x 106D mm 92H x 92W x 117D mm 89H x 89W x 43D mm
Cooling 0.62 kg 0.93 kg 1.41 kg 0.84 kg

 

相關產品

雷射相關資訊