寬頻中紅外光偏振鏡廠商, 寬頻中紅外光偏振鏡台灣代理商公司│維佳科技

產品分類

寬頻中紅外光偏振鏡

Standa

14PIR

產品特色

Extremely broadband
Wide acceptance angle
Polyethylene polarizers for 20-1000 microns are also available
Long life time

A fine array of parallel conducting wires whose period is smaller compared to the wavelength of incident radiation will transmit one polarisation and reflect the other. The component of the radiation whose electric vector is perpendicular to the direction of the wires and induces current in the wires will be transmitted and the parallel vector reflected. Mid-IR polarizers are produced by holographic method (i.e. laser interferometry) or mechanically ruled. These polarisers do not suffer from beam displacement, are not affected by diverging or converging beam, have wide acceptance angle without degradation of performance and portable.

Tmax graph

Tmin graph

產品規格

Standard Specifications

Dimension tolerance:	+/- 0.5 mm
Wire grid spacing:	2700 grooves/mm (nominal) for holographic type polarizers 1200 grooves/mm (nominal) for mechanically ruled polarizers
Surface flatness:	<λ/20 @ 10.6 µm (up to 25 mm CA) <λ/10 @ 10.6 µm (up to >25 mm CA)*
Parallelism error:
Coating:	Not coated
Laser induced damage threshold:	>100 W/cm² CW or > 2 J/cm² 100 ns pulsed for mechanically ruled polarizers

*Except KRS-5 material

Material	Type	Clear aperture, mm	Mount diameter, mm	Extinction ratio	Product ID
KRS-5	Holographic	18	25	150:1 @ 3 µm; 300:1 @ 15 µm	14PIR-H-18-25-1
KRS-5	Holographic	25	35	150:1 @ 3 µm; 300:1 @ 15 µm	14PIR-H-25-35-1
CaF2	Holographic	18	25	150:1 @ 3 µm; 300:1 @ 8 µm	14PIR-H-18-25-2
CaF2	Holographic	25	35	150:1 @ 3 µm; 300:1 @ 8 µm	14PIR-H-25-35-2
BaF2	Holographic	18	25	150:1 @ 3 µm; 300:1 @ 10 µm	14PIR-H-18-25-3
BaF2	Holographic	25	35	150:1 @ 3 µm; 300:1 @ 10 µm	14PIR-H-25-35-3
ZnSe	Holographic	18	25	150:1 @ 3 µm; 300:1 @ 10 µm	14PIR-H-18-25-4
ZnSe	Holographic	25	35	150:1 @ 3 µm; 300:1 @ 10 µm	14PIR-H-25-35-4
CaF2	Ruled	18	25	50:1 @ 3 µm; 80:1 @ 5 µm	14PIR-R-18-25-2
CaF2	Ruled	34	50	50:1 @ 3 µm; 80:1 @ 5 µm	14PIR-R-34-50-2
ZnSe	Ruled	18	25	50:1 @ 3 µm; 75:1 @ 5 µm; 100 @ 10.6 µm	14PIR-R-18-25-4
ZnSe	Ruled	34	50	50:1 @ 3 µm; 75:1 @ 5 µm; 100 @ 10.6 µm	14PIR-R-34-50-4