.jpg)
11UP19-H - Laser Power Detector
Standa
11UP19
11UP19-H - Laser Power Detector 雷射功率偵測器
11UP 系列偵測器在小巧的外型中即可承受高功率雷射輸入。它們可直接安裝於支桿、固定支架上，方形外殼也能讓您直接放置於桌面操作。11UP19-15S-H5 型號厚度僅 21 mm，非常適合用於雷射維修與保養應用。從數毫瓦到 15 瓦，它是同級中體積最小、結構最堅固且反應速度最快的偵測器。其吸收層可承受 36 kW/cm² 的平均功率密度，短時間內甚至可操作至 23 瓦。選配「能量量測模式（Energy Mode）」後，11UP19-H 系列的每一款機型皆可同時量測單次脈衝能量與平均功率。量測範圍涵蓋：Q 開關雷射 20 mJ 至 5 J，或長脈衝雷射最高可達 25 J。
11UP19-H 常用於以下雷射類型：CO₂、Ti:Sapphire、二極體雷射（脈衝或連續波）、YAG（半導體泵浦、連續波或高重複頻率）、Ruby（長脈衝）、DPSSL、Excimer 及氬離子雷射等。
主要特色
• 模組化設計
可透過五種不同冷卻模組擴充偵測器的功率承載能力。
• 高效能表現
上升時間快（0.6 秒），損傷閾值高達 45 kW/cm²。
• 精巧外型
15S 型號厚度僅 20.6 mm。
• 能量量測模式
可量測單次脈衝能量最高達 15 焦耳。
• 智慧型介面
內建所有校正數據。
相容監測儀：
 11MAESTRO |
 11UNO |
 11TUNER |
 11M-LINK |
 11P-Link |
 11S-LINK |
相似產品：
 |
 |
 |
| 11UP19-W | 11QE12 | 11PH |
The 11UP series detectors can take a lot of laser power in a small body. They come ready to mount on a rod, a bracket and the square case even lets you set them right on the table. The 11UP19-15S-H5, just 21 mm thin, is ideal for laser maintenance and service applications. From a few mW to 15 W it is the smallest, toughest and fastest detector in its class. The absorber handles 36 kW/cm² of average power density. You can even run it up to 23 watts for short periods. With Energy Mode option every member of 11UP19-H family can be equipped to measure single shot pulse energies as well as average power. From 20 mJ up to 5 J Q-switched or 25 J long pulse. 11UP19-H often used with CO2, Ti: sapphire, Diode (pulsed or CW), YAG (diode pumped, CW or high rep. rate), Ruby (long pulse), DPSSL, Excimer, Argom ion lasers.
Main Features
• Modular Concept
Increase the power capability of your detector with 5 different cooling modules
• High Performance
Fast Rise Time (0.6 sec), High Damage Threshold (45 kW/cm2)
• Compact Design
Only 20.6 mm thick (15S model)
• Energy Mode
Measure single shot energy up to 15 J
• Smart Interface
Containing all the calibration data
Compatible Monitors:
11MAESTRO |
11UNO |
11TUNER |
11M-LINK |
11P-Link |
11S-LINK |
Similar products:
|
|
|
| 11UP19-W | 11QE12 | 11PH |
| Model | 11UP19K-15S-H5 | 11UP19K-30H-H5 | 11UP19K-50L-H5 | 11UP19K-110F-H9 | 11UP19K-150W-H5 | 11UP19K-200W-H9 |
| MAX AVERAGE POWER (CONTINUOUS / 1 MINUTE) | 15 W / 30 W | 30 W/ 60 W | 50 W / 90 W | 110 W / 150 W | 150 W f / 190 W f | 200 W f / 200 W f |
| EFFECTIVE APERTURE | 19 mm Ø | 19 mm Ø | 19 mm Ø | 19 mm Ø | 19 mm Ø | 19 mm Ø |
| COOLING METHOD | Convection | Heatsink | Large Heatsink | Fan-Cooled | Water-Cooled | Water-Cooled |
| MEASUREMENT CAPABILITY | ||||||
| Spectral Range * | 0.19 – 20 µm | 0.19 – 20 µm | 0.19 – 20 µm | 0.19 – 20 µm | 0.19 – 20 µm | 0.19 – 20 µm |
| Noise Equivalent Power a | 1 mW | 1 mW | 1 mW | 3 mW | 1 mW | 3 mW |
| Rise Time (nominal) b | 0.6 sec | 0.6 sec | 0.6 sec | 1.5 sec | 0.6 sec | 1.5 sec |
| Sensitivity (typ into 100 k Ω load) c | 0.65 mV/W | 0.65 mV/W | 0.65 mV/W | 0.23 mV/W | 0.65 mV/W | 0.23 mV/W |
| Calibration Uncertainty d | ±2.5 % | ±2.5 % | ±2.5 % | ±2.5 % | ±2.5 % | ±2.5 % |
| Repeatability | ±0.5 % | ±0.5 % | ±0.5 % | ±0.5 % | ±0.5 % | ±0.5 % |
| Energy Mode | ||||||
| Sensitivity | 0.65 mV/J | 0.65 mV/J | 0.65 mV/J | 0.23 mV/J | 0.65 mV/J | 0.23 mV/J |
| Maximum Measurable Energy e | 15 J | 15 J | 15 J | 25 J | 15 J | 25 J |
| Noise Equivalent Energy a | 0.02 J | 0.02 J | 0.02 J | 0.06 J | 0.02 J | 0.06 J |
| Minimum Repetition Period | 4 sec | 4 sec | 4 sec | 4 sec | 4 sec | 4 sec |
| Maximum Pulse Width | 88 ms | 88 ms | 88 ms | 88 ms | 88 ms | 88 ms |
| Accuracy with energy calibration option ±5 % ±5 % ±5 % ±5 % ±5 % ±5 % | ||||||
| DAMAGE THRESHOLDS | ||||||
| Maximum Average Power Density g | 36 kW/cm2 | 36 kW/cm2 | 36 kW/cm2 | 45 kW/cm2 | 36 kW/cm2 | 45 kW/cm2 |
| Pulsed Laser Damage Thresholds | Max Energy Density | Peak Power Density | ||||
| 1064 nm, 360 µs, 5 Hz | 5 J/cm2 (H5), 9 J/cm2 (H9) | 14 kW/cm2 (H5), 25 kW/cm2 (H9) | ||||
| 1064 nm, 7 ns, 10 Hz | 1 J/cm2 | 143 MW/cm2 | ||||
| 532 nm, 7 ns, 10 Hz | 0.6 J/cm2 | 86 MW/cm2 | ||||
| 266 nm, 7 ns, 10 Hz | 0.3 J/cm2 | 43 MW/cm2 | ||||
| PHYSICAL CHARACTERISTICS | ||||||
| Effective Aperture | 19 mm Ø | 19 mm Ø | 19 mm Ø | 19 mm Ø | 19 mm Ø | 19 mm Ø |
| Absorber (High Damage Threshold) | H5 | H5 | H5 | H9 | H5 | H9 |
| Dimensions | 50H x 50W x 20.6D mm | 50H x 50W x 56.3D mm | 76.2H x 76.2W x 74.7D mm | 54.2H x 54.2W x 55.6D mm | 50H x 50W x 33D mm | 50H x 50W x 33D mm |
| Weight (head only) | 0.16 kg | 0.21 kg | 0.48 kg | 0.25 kg | 0.24 | kg 0.24 kg |
Specifications are subject to change without notice
相關產品
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
雷射相關資訊
-
2025台北國際汽機車零配件展&台北國際車用電子展
台北國際汽機車零配件展&台北國際車用電子展，已經順利結束啦~非常感謝前往參觀與支持的維佳客戶們，如有
-
2018 台灣鈑金．雷射應用展活動照片
台灣鈑金、雷射應用展已經順利的結束囉，這是維佳時隔二年之後再度參加鈑金、雷射展。這一次的展出，維佳展
-
2024 半導體展SEMICON Taiwan 活動照片
半導體展 SEMICON Taiwan 已圓滿落幕，衷心感謝各位客戶在展期期間蒞臨維佳科技展位！這次
-
2020 台灣鈑金、雷射應用展 9/18(五)-9/22(二)
2020 台灣鈑金、雷射應用展即將於9/18(五) - 9/22(二) 在大台中國際會展中心盛大舉行